6000WH HOME BACKUP SYSTEM (36500, 44060)
$8,599.99
Keep up to 4 essential home circuits running with the Yeti 6000X and Yeti Home Integration Kit transfer switch that delivers over 6,000 Watt Hours of backup. This bundle gets you on your way to building your custom home energy system.
Frequently Asked Questions
Is my Yeti locked into my house once I install the Home Integration Kit for backup power?
No! That’s one of the great benefits of this versatile setup. The Yeti can not only hookup to your home for backup power, but it can also be easily removed for portable usage for your RV, boat, utility vehicle, backyard, etc.
Can the Yeti backup my AC and heating?
Although it may be possible heating and air conditioning requires a large amount of energy. The Yeti 1500X and larger have a maximum output of 2000W if your AC or Heating devices require 2000W or lower it is possible to run these devices although due to the large energy requirements of the devices it may drain your Yeti Power Station relatively fast. We recommend reviewing the energy requirements of your devices to confirm compatibility with the 2000W inverter.
How long will the Yeti run my device?
Please refer to our runtime chart at https://www.goalzero.com/product-features/portable-power-stations/#chargetime. Here’s a quick and dirty lesson in power: All Goal Zero power products have a number in their name, ex. Venture 30, Flip 36, Goal Zero Yeti 500X. These numbers refer to the Watt Hours (Wh), or the amount of energy that can be stored in each battery, and can help estimate how long your gear will run from each power bank or power station. For example, a 500Wh battery should run a 100W light for 5 hours (500/100=5). If your gear falls within the 500Wh capacity of the Yeti, you’ll want to check the restrictions on each of the output ports. When you’re deciding on what to power from your new Goal Zero power bank or power station, it’s helpful to look into your device’s wattage consumption.
Goal Zero Yeti 6000X Portable Power Station
PORTS
- USB-A port (output): 5V, up to 2.4A (12W max), regulated
- USB-C port (output): 5 – 12V, up to 3.0A (18W max), regulated
- USB-C PD port (input / output): 5 – 20V, up to 3.0A (60W max), regulated
- 6mm port (output, 6mm): 12V, up to 10A (120W max), regulated
- 12V car port (output): 12V, up to 13A (160W max), regulated
- 12V HPP (output): 12V, up to 30A (360W max), regulated (front face/under lid)
- 120V AC Inverter: 120VAC 60Hz, 16.5A (2000W, 3500W surge) (output, pure sine wave)
- Charging port (input, 8mm): 14-50V, up to 10A (150W max) (front face/under lid)
- HPP charging port (input): 14-50V, up to 50A (600W max)
- Expansion Module port: Covered port under the lid. To be used with Goal Zero expansion modules only.
Yeti Home Integration Kit
PORTS
- Voltage: 120 Single-Phase
- Frequency: 60 Hertz
- Rated Watts: 1875 Watts
- Rated Amps: 15A @ 120 Volts (Single Phase)
- Number of Circuit Breakers: 4
- Max Generator Input: 15 Amps
- Maximum Wattage: 1875 Watts
- Transfer Switch Circuits: 15A 120V
- Circuit Breaker Protection: Each Circuit
GENERAL
- Product SKU: 44060
- Made: USA
- Weight: 9.5 lbs (4.3 kg)
- Dimensions: 7.75 x 11.25 x 4.5
- Enclosure: NEMA 1R
- Conduit Length: 18
- UL Listed: Yes
- Compatible with Yeti X and Yeti Lithium Power Stations 1000W and up
BATTERY DETAILS
- Cell chemistry: Li-ion NMC
- Pack capacity: 6071Wh (10.9V, 556Ah)
- Single Cell Equivalent Capacity: 1668Ah @ 3.6V
- Pack Lithium Content: 500g
- Lifecycles: 500 Cycles to 80% capacity (Discharge rate: 1C, Full charge/discharge, Temp: 25C)
- Shelf-life: Charge every 3-6 months
- Management system: MPPT charge controller
GENERAL
- Chainable: No
- Simultaneous Recharge & Discharge: Yes
- SKU: 36500
- Weight: 106 lbs (48.1 kg)
- Dimensions: 15.3 x 10.1 x 17 in (38.9 x 25.7 x 43.2 cm)
- Operating usage temp. 32-104 F (0-40 C)
- Warranty 24 months

WHAT’S IN THE BOX
- Goal Zero Yeti 6000X Portable Power Station
- 600W Power Supply (AC Wall Charger)
- Yeti Roll Cart
- Yeti Home Integration Kit