5400WH HOME BACKUP SYSTEM (36400, 44060, 44105, 98385)
$7,099.99
The 1.5+ day backup system. This all-in-one bundle provides roughly 5,400 Watt Hours of power for your portable home energy needs. Equipped with a Yeti 3000X, Yeti Home Integration Kit transfer switch, two Yeti Tank Expansion Batteries, and the Link Expansion Module.
Frequently Asked Questions
Is my Yeti locked into my house once I install the Home Integration Kit for backup power?
No! That’s one of the great benefits of this versatile setup. The Yeti can not only hookup to your home for backup power, but it can also be easily removed for portable usage for your RV, boat, utility vehicle, backyard, etc.
Can the Yeti backup my AC and heating?
Although it may be possible heating and air conditioning requires a large amount of energy. The Yeti 1500X and larger have a maximum output of 2000W if your AC or Heating devices require 2000W or lower it is possible to run these devices although due to the large energy requirements of the devices it may drain your Yeti Power Station relatively fast. We recommend reviewing the energy requirements of your devices to confirm compatibility with the 2000W inverter.
How do I charge my Yeti Expansion Tanks?
You can recharge your Yeti Expansion tanks with you wall power supply or Goal Zero Solar Panels using the 8mm input on the Yeti Link expansion module. This allows you to recharge your Yeti Expansion Tanks with an input up to 150W while the Yeti Tank batteries are recharging your Yeti Power Station. For a faster recharge on your Yeti Expansion tanks via Solar you can add the 30A External MPPT controller. This will allow you to connect more solar panels directly to your Yeti Expansion Tanks for a decreased recharge time.
YETI CHARGE TIMES
- AC Wall Charger
- 230W: 14 Hours
- 600W: 6 Hours
- Solar
- 100W (Boulder/Nomad 100 (BC) ): 36-72 Hours
- 200W (Boulder (BC/Nomad) ): 18-36 Hours
- 400W (Boulder/Nomad 200 X 2): 9-18 Hours
- 600W (Boulder/Nomad 200 X 3): 6-12 Hours
- 800W (Boulder/Nomad 200 X 4): 6-9 Hours
- 1200W (Boulder/Nomad 200 X 6): 6 Hours
PORTS
- USB-A port (output): 5V, up to 2.4A (12W max), regulated
- USB-C port (output): 5 – 12V, up to 3.0A (18W max), regulated
- USB-C PD port (input / output): 5 – 20V, up to 3.0A (60W max), regulated
- 6mm port (output, 6mm): 12V, up to 10A (120W max), regulated
- 12V car port (output): 12V, up to 13A (160W max), regulated
- 12V High Power Port (output): 12V, up to 30A (360W max), regulated (front face/under lid)
- 120V AC Inverter: 120VAC 60Hz, 16.5A (2000W, 3500W surge) (output, pure sine wave)
- Charging port (input, 8mm): 14-50V, up to 10A (150W max) (front face/under lid)
- High Power charging port (input): 14-50V, up to 50A (600W max)
- Expansion Module port Covered port under the lid. To be used with Goal Zero expansion modules only.
BATTERY DETAILS
- Cell chemistry: Li-ion NMC
- Pack capacity: 3032Wh (10.8V, 280.8Ah)
- Single Cell Equivalent Capacity: 842.4Ah @ 3.6V
- Pack Lithium Content: 253g
- Lifecycles: 500 Cycles to 80% capacity (Discharge rate: 1C, Full charge/discharge, Temp: 25C)
- Shelf-life: Charge every 3-6 months
- Management system: MPPT charge controller
YETI LINK CHARGE TIMES
- Max Input from Yeti Tank to
- Goal Zero Yeti 1000/1000X: 454-605W
- Goal Zero Yeti 1400/1500X: 454-750W
- Goal Zero Yeti 3000/3000X: 750W
- Goal Zero Yeti 6000X: 750W
GENERAL
-
- Chainable: No
- Simultaneous Recharge & Discharge: Yes
- Product SKU: 36400
- Weight: 69.78 lbs (31.65 kg)
- Dimensions: 15.25 x 10.23 x 13.6 in (38.74 x 25.98 x 34.54 cm)
- Operating usage temperature:32-104 F (0-40 C)
- Warranty: 24 months
-
YETI TANK BATTERY DETAILS
- Lead Acid (AGM)
- 1200Wh (12V, 100Ah)
YETI TANK BATTERY CHARGE TIMES
- Wall Charger (120W): 11hrs per tank
HIK GENERAL
- Product SKU: 44060
- Made: USA
- Weight: 9.5 lbs (4.3 kg)
- Dimensions: 7.75 x 11.25 x 4.5
- Enclosure: NEMA 1R
- Conduit Length: 18
- UL Listed: Yes
- Compatible with Yeti X and Yeti Lithium Power Stations 1000W and up
HIK PORTS
- Voltage: 120 Single-Phase
- Frequency: 60 Hertz
- Rated Watts: 1875 Watts
- Rated Amps: 15A @ 120 Volts (Single Phase)
- Number of Circuit Breakers: 4
- Max Generator Input: 15 Amps
- Maximum Wattage: 1875 Watts
- Transfer Switch Circuits: 15A 120V
- Circuit Breaker Protection: Each Circuit
YETI TANK GENERAL
- Product SKU: 23105
- Dims 15.5 x 7.5 x 10.5 in (39.37 x 19.05 x 26.67 cm)
- Weight 77.1 lbs (34.97 kg)
- Warranty: 12 Months
YETI LINK GENERAL
- Product SKU: 98210
- Weight: 1.5 lbs (680 g)
- Dimensions: 10.25 x 3.3 x 1.5 in (26 x 8.4 x 3.8 cm)
- Warranty 12 months
- YETI X 120W POWER SUPPLY
- Gauge: 16AWG
- Cable Length: 9′ 4″
- Dimensions: 2.5 x 5.9 x 1.4 in (6.5 x 15 x 3.5 cm)
YETI LINK PORTS
- Do not exceed 22V input
- 8mm Charging Port (input): 14 – 22V Do not exceed 150W (10A) per port
- External Battery Connector (output): 65A charge controller
- External Battery Connector (Input/Output): 10.7-15V. Do not exceed 15V
- YETI X 120W POWER SUPPLY
- Input: AC Wall Plug 100-240V – 50/60Hz 3.0A
- Output: 8.0mm 16V- 7.5A, 120W
YETI TANK PORTS
- Expansion port male connector (input/output) 100A Max
- Expansion port female connector (input/output) 100A Max

WHAT’S IN THE BOX
- Goal Zero Yeti 3000X Portable Power Station
- 230W Power Supply (AC Wall Charger)
- Yeti Roll Cart
- Yeti Home Integration Kit
- Yeti Link Expansion Module
- (2x) Yeti Tank Expansion Battery
- 600W Fast Charge Power Supply